VINC’I® 70 WALL FORMWORK

Wall Formwork System

VINC’I® 70 is a Wall Formwork System for foundations, beams, and basement walls composed of high-strength steel frame panels with state-of-the-art production quality and highly versatile accessories. It provides ease of applicability and significantly reduced labour. The main element heights are 300 cm, 270 cm, 180 cm, 150 cm, and 120 cm. The panel widths are 30, 45, 60, 75, 90, 120 and 240 cm where the Column ‐ Panels ( 75 cm width ) have integrated anchor holes with 5 cm intervals. All panels have a 12 cm depth. They can be connected with VINC’I 80 panels easily. The panels consists of torsionally stiff, high strength flat profile frames with lateral closed profiles which are adding on the general stiffness of the panels. The panel-facing material is either a modern and long-lasting 20mm thick polypropylene plate strengthened with Aluminum sheets or a long-life 18 mm UPM WISA® – Form Birch plywood. It is possible to apply the lock through the frame profile at any required position. Vertically or horizontally, it is possible to continuously shift the panels against each other without limiting the locking possibilities.

The universally applicable innovative panel lock “TAMON” providesleak proof joints. It is possible to put the lock on any lateral profile, either vertical or horizontal at any position on the frame. The frames are powder coated after grid‐blasting against corrosion. This special coating provides ease of cleaning while avoiding adhesiveness against concrete. The static calculations for formwork structure of VINC’I 70 fulfills all requirements of GSV (Güteschutzverband Betonschalungen) according to DIN 18202 TAB.3 Line 7 with a load bearing capacity of 70 kN/m2 and max. 3 mm deflection. The formwork system could be used at; foundations, walls, columns, retaining walls, containers, shafts and all other steel reinforced concrete structures.

The anchor holes are suitable to DW 15 tie‐rods and have load bearing capacities of 70 kN/m2. All panels have solid steel corner pieces strengthening the panel structure and acting as strong leverage points